This message will be sent when the SD memory card becomes full. This message will be sent when failed to mount the SD memory card.
Add page 34 to Favourites. Available port number:1 - Default [Retry times] Select a retry time of Panasonic alarm protocol. Up to 8 destination address- es can be registered. To notify by Panasonic alarm protocol when an alarm occurred, check the Alarm checkbox respective to the desired address.
To notify by Panasonic alarm protocol when any of the following occurred, check the Diag. Important: Confirm that the destination IP addresses are regis- tered correctly. When a registered IP address does not exist, notification may be delayed. Add page 35 to Favourites. Configure the settings relating to the user authentication [User] Click the [User] tab on the Authentication setup page.
Up to 16 users can be registered. Number of characters for the user name:1 - 32 char- acters Default: blank [Password] [Retype password] Enter the password. Number of characters for the password:4 - 32 char- acters Default: blank Note: When the user name already in use is entered and the [REG] button is clicked, the respective user infor- mation will be overwritten. Administrator: Allowed all available operations of the camera. Camera control: Allowed to display images from the camera and to control the camera.
The camera set- ting configuration is unavailable. Live only: Only displaying live images is available. The camera setting configuration and camera con- trol are unavailable. The registered user will be displayed with the access level. Example: admin [1] To delete the registered user, click the [DEL] button after selecting the user to be deleted.
Important: If all users whose access level is 1. Administrator is deleted, it will be impossible to configure the set- tings. Add page 36 to Favourites. Default:OFF Important: Before configuring the host authentication, it is nec- essary to register IP addresses of the PCs to be allowed to access the camera and determine their access levels.
If ON is selected for Host authenti- cation before registering the hosts IP addresses , it will be impossible to access the camera. Host name is unavailable for the IP address. The setup menu is operable by only users whose access level is "1. Click the desired button in the frame on the left of the window to display the respective setup menu. When there are tabs at the top of the setup page displayed in the frame on the right of the window, click the desired tab to display and configure the setting items relating to the name of the tab.
When there are two [SET] buttons or [REG] buttons or more on the page, click the respective button to the edited setting item. Click this button to display the "Basic setup" page.
The basic settings such as time and date and camera name, and the settings relating to the NTP server and the SD memory card can be configured on the "Basic setup" page. Refer to page 19 for further information. Click this button to display the "Camera setup" page. The settings relating to image from the camera such as image quality and brightness, and the settings relating to audio can be configured on the "Camera setup" page.
Refer to page 22 for further information. Click this button to display the "Multi-screen setup" page. The cameras to be used for the multi-screen display can be registered on the "Multi-screen setup" page.
Refer to page 27 for further information. Click this button to display the "Alarm setup" page. The settings relating to alarm occurrences such as settings for the alarm action at an alarm occurrence, the alarm occurrence notification, and the VMD area settings can be configured on the "Alarm setup" page. Refer to page 28 for further information. Click this button to display the "Authentication setup" page.
The settings relating to the authentication such as users and PCs restrictions for accessing the camera can be configured on the "Authentication setup" page. Refer to page 35 for further information. Click this button to display the "Server setup" page. The settings relating to the mail server and the FTP server to which the camera accesses can be configured on the "Server setup" page.
Refer to page 37 for further information. Welcome to ManualMachine. We have sent a verification link to to complete your registration. Log In Sign Up. Forgot password? Enter your email address and check your inbox. Please check your email for further instructions. Enter a new password. About these operating instructions There are 2 sets of operating instructions for the WV-NP as follows. The following are descriptions of how to monitor images from the camera on a PC.
Monitor images from a single camera. Step 1 Start up the web browser. Step 3 Press the [Enter] key on the keyboard. User Name: admin Password: To enhance the security, change the password for the user "admin". Refer to the following page for further information about the "Live" page. One shot button Click this button to take a picture a still picture. To return to the "Live" page, click the [Live] button.
The displayed image will be zoomed in. Image will be displayed with the default brightness 0. When the button is clicked, the button will disap- pear. When this button is clicked, the button will turn into the button and audio will be heard. Monitor images from multiple cameras Images from multiple cameras can be displayed on a multi-screen. Step 1 Click the [Multi-screen] button. The alarm action will be performed when the following alarm occur.
Alarm type Terminal alarm: When connecting an alarm device such as a sensor to the alarm connector on the rear of the camera, the alarm action will be performed when the connected alarm device activated. Note: The [Alarm occurrence indication] button will be refreshed in 30 seconds intervals. Notify of alarm occurrences to the device connected to the alarm connector. Notify of alarm occurrences by e-mail Alarm mail alarm occurrence notification can be sent at an alarm occurrence to the e-mail addresses registered in advance.
Notify of alarm occurrences to the designated IP addresses Panasonic alarm protocol This function is available only when Panasonic device, such as the network disk recorder, is connected to the system. Important: When using this function, set the user name and password to restrict users who can log into the FTP server. Transmit an alarm image at an alarm occurrence Alarm image FTP transmission An alarm image can be transmitted at an alarm occurrence to the FTP server. Transmit images at a designated interval or period FTP periodic transmission Images can be transmitted at a designated interval or period.
Save images on the SD memory card when failed to transmit images by the FTP periodic transmission function Images failed to transmit by the FTP periodic transmission can be saved automatically on the SD memory card.
Important: We make no guarantee for any damages of files on the SD memory card incurred by malfunction or error occurrence in files saved on the SD memory card regardless of what the cause may be.
Save images on the SD memory card By configuring the following settings, saving images which had been failed to transmit to the FTP server using the FTP periodic transmission function will become available.
Step 2 Enter the user name whose access level is "1. Note: The default user name with the access level "1. User Name: admin Password: Step 3 Move the current directory to drive B and obtain images.
Equipped security functions The following security functions are featured in this camera. How to display the setup menu Step 1 Display the "Live" page. How to use a fixed-focal lens How to insert an SD memory card How to remove the SD memory card Performing the Network Settings Install the software Configure the network settings of the camera using the Panasonic IP setting software Standard Accessories Refer to all work related to the installation of this product to qualified service personnel or system installer.
There are no serviceable parts inside. Contact the qualified service personnel for maintenance. Do not expose the appliance to direct sunlight for hours and do not install the product near a heater or an air conditioner. Otherwise, it may cause deformation, discoloration and malfunction. Keep the appliance away from water and moisture.
Do not expose the product to direct heat such from a heater. Do not strike or shake, as this may damage the appliance. It may cause a malfunction. When displaying the same image on the PC monitor at length, the PC monitor may be damaged.
It is recommended to use a screen-saver. This camera will restart when detecting an error caused by any reason. The camera will be inoperable for around 30 seconds after. Turn the power off when cleaning of the camera. Use a dry cloth to clean the camera.
When the dirt is hard to remove, use a mild detergent and wipe gently. Then, wipe with a dry cloth. Do not use strong abrasive detergent when cleaning the camera body. Otherwise, it may cause discoloration. When using a chemical cloth for cleaning, read the caution provided with the chemical cloth product. Use a lens cleaning paper used to clean camera lenses or lenses of spectacles. When using solvent, use an alcohols solvent.
Do not use a thinner or a glass cleaner. Otherwise, it may cause malfunction or damage data recorded on the SD memory card. Recorded data on the SD memory card will be deleted when formatted.
0コメント